Portable Melting Temperature Measuring Instrument Molten Steel and Iron Water Thermocouple Temperature Measuring Gun W330
Portable Melting Temperature Measuring Instrument Molten Steel and Iron Water Thermocouple Temperature Measuring Gun W330
描述
Installation of the test gun
Open the packaging box, take out the two sections of the test gun, hold the copper head end with your hand, and screw them together section by section in sequence. Be careful not to twist the compensating wire to avoid breaking the weld. After tightening, there should be no shaking sensation.
Carefully insert the signal socket inside the screwed test gun barrel into the signal plug in the instrument gun socket. Make sure to insert it all the way in; 否则, poor contact may occur. Turn on the power switch of the instrument, and the instrument will display “-1”. After plugging in the thermocouple, the instrument will display the ambient temperature (for instruments with division B, it will display 0). It indicates that the instrument and the test gun have made good contact. At this point, tighten the stop head screw and keep it ready for use.
Resolution (℃) | 1 |
Response time（S) | 1 |
Environmental conditions | Temperature（℃）：0-50 Humidity (%RH)：5-80 |
Storage time | Temperature（℃）：-20-60 Humidity (%RH)：5-90 |
Power supply | Rechargeable battery: DC6V±10% |
热电偶 | 分部编号 | 测量范围 (℃） | Applicable occasions |
Single platinum-rhodium | KS-602/604 | 0-1750 | Molten steel, iron and copper |
Single platinum-rhodium | KR-602/604 | 0-1750 | Molten steel, iron and copper |
Double platinum-rhodium | KB-602/604 | 500-1800 | Molten steel, iron and copper |
Tungsten rhenium | KW-602/604 | 0-2000 | 钢, molten iron |
Nickel-chromium – 镍硅 | K | 0-1000 | Liquid aluminium and zinc |
When used in conjunction with the corresponding thermocouple, the instrument can be used for rapid and precise temperature measurement in the smelting scenarios of molten steel, molten iron, molten copper, molten aluminum, ETC.
产品包装解决方案
2.我们提供了 熏蒸实木托盘 用于重型出口和 耐用的胶合板板条箱 用于较轻的负载, 免熏蒸.
3.所有解决方案均符合国际贸易标准, 包括发货证明 我们, 加拿大, 和欧盟, 确保无缝清关和虫害防治合规.
我们的核心竞争力:
2.双渠道采购解决方案:直接OEM服务, 定制加热系统和线性槽扩散器，以满足项目特定的气流和热要求.
3.直接OEM服务: 定制加热系统和线性槽扩散器，以满足项目特定的气流和热要求.
4.技术合作模式:超越交易约定, 我们为供暖解决方案提供通风系统设计和能效审核,多语言售后技术支持.
5.创新与可持续发展:投资 8% R 中的年收入&D 致力于创造更好的新产品.
1. 问:我们是谁?
您必须登录才能发表评价。
评价
目前还没有评价