Electric Power Cable Heat Trace Cable Heating Tape 500C High Temperature Fiberglass Braid Heating Belt for Pipeline
Electric Power Cable Heat Trace Cable Heating Tape 500C High Temperature Fiberglass Braid Heating Belt for Pipeline
Beskrivning
Electric Power Cable Heat Trace Cable Heating Tape 500C High Temperature Fiberglass Braid Heating Belt for Pipeline
Produktbeskrivning
Fibergalss Electric Heating Cable
Fiberglass electric heating cable is suitable for heating and heat preservation of tanks, rör, tanks and other containers ofvarious industrial equipments. It is mainly composed of electrothermal materials and insulating materials. The electrothermalmaterials are nickel-chromium alloy belts, which have fast heat generation and high thermal efficiency.
Long service life, the insulation material is multi-layer alkali-free glass fiber, with good temperature resistance and reliableinsulation performance. The utility model has the advantages of soft structure, can be directly wound on the surface of the heatedpart when used, and has uniform temperature, simple installation, convenient use, safety and reliability.
Specifikation
Structural Performance(1) It is mainly composed of nickel-chromium alloy wires and insulating material, and has fast heating speed, high heat efficiency and long service life.(2) Alkali-free glass fiber core rack is wound with electric heating wires, fiberglass is used as main insulation, the heatresistance performance is excellent, and the insulation performance is reliable.(3) It has great flexibility, and can be directly wound on a to-be-heated device, with good contact and uniform heating.Note: fiberglass heating cable do not have the functions of waterproof and moistureproof .
Produkt | Spänning(V) | Wattal(W) | Width(mm) | Isoleringsresistans | Maximal temperatur |
RDG–1 | 220 | 100 | 10-30 | ＞2MΩ | ≤500℃ |
RDG–2 | 220 | 200 | 10-30 | ||
RDG–3 | 220 | 300 | 10-30 | ||
RDG–4 | 220 | 400 | 10-30 | ||
RDG–5 | 220 | 500 | 10-30 | ||
RDG–6 | 220 | 600 | 10-30 | ||
RDG–7 | 220 | 700 | 10-30 | ||
RDG–8 | 220 | 800 | 10-30 | ||
RDG–9 | 220 | 900 | 10-30 | ||
RDG–10 | 220 | 1000 | 10-30 |
installations instruktioner
Step 1: Pipe Surface PreparationPrepare surface to be heated: Wipe the surface making sure there is no foreign material, like liquid, on the surface. Foreignmaterial inhibits heat transfer and liquid can damage select models of heating tape (i.e. HighTemperature Heating Tapes).Make a visual inspection of heating tape: We recommend that you replace the heating tape if it becomes torn or damaged. Damaged heating tape is a safety hazard and will not operate correctly.Step 2: Heating Tape Installation (wrap)Heating tape can be installed on nearly any surface due to its flexibility. Spiral wrap the heating tape onto the surface to beheated so that the length of one entire side of the heating tape is in full contact with the surface .The distance between spiral wraps is dependent on the uniformity requirements and the amount of available heating tape. A minimum distance of 1/8” is required between spiral wraps to avoid damage to the heating tape.Attach the heating tape to the surface by either using built-in tie straps, high-temperature adhesive tape or mechanical clamping devices that will not cause damage to the heating tape.Ensure the heating tape is not kinked, twisted, or hanging free from the surface.Do not overlap heating tape on itself.This can cause damage to the heating tape due to overheating.Step 3: Connecting Your Heating Tape to a Temperature Controlling DeviceYour heating tape must be connected to an external temperature control device. Ensure your temperature controller is protected by a properly sized circuit breaker or fuse. Use of a ground fault circuit interrupter is highly recommended and may be required for your installation.For proper temperature control, secure a thermocouple, RTD, or other sensing device with one strip of adhesive tape so that it is in close proximity to the heater to prevent overheating.
Förpackning & Leverans
FAQ
1. vilka är vi?Vi är baserade i Jiangsu, Kina, börja från 2010, sälj till Oceanien(50.00%),Nordamerika(30.00%),Sydamerika(10.00%),Södra Europa(10.00%). Det finns totalt ca 11-50 personer på vårt kontor.2. hur kan vi garantera kvalitet?Alltid ett förproduktionsprov innan massproduktion;Alltid slutbesiktning före leverans;3.vad kan du köpa av oss?Patronvärmare/Ingjuten värmare/Cirkulationsvärmare/Motorblockvärmare/Open Coil Heater, Finnsvärmare/Stripvärmare/värmeelement4. varför ska du köpa från oss inte från andra leverantörer?1.Mer än 40 års erfarenhet
2.UL CE RoHS CQC ISO9001:2008
3.R&D-laget
4.Tillhandahålla testrapport
5.Stöd produktdesign5. vilka tjänster kan vi tillhandahålla?Godkända leveransvillkor: FOB,CFR,CIF,EXW,DDU,Expressleverans；Godkänd betalningsvaluta:USD,EUR,CNY;Godkänd betalningstyp: T/T,L/C,D/P D/A,Penga gram,Kreditkort,PayPal,Western Union,Kontanter,Escrow;Språk som talas:engelsk,kinesiska,franska
2.UL CE RoHS CQC ISO9001:2008
3.R&D-laget
4.Tillhandahålla testrapport
5.Stöd produktdesign5. vilka tjänster kan vi tillhandahålla?Godkända leveransvillkor: FOB,CFR,CIF,EXW,DDU,Expressleverans；Godkänd betalningsvaluta:USD,EUR,CNY;Godkänd betalningstyp: T/T,L/C,D/P D/A,Penga gram,Kreditkort,PayPal,Western Union,Kontanter,Escrow;Språk som talas:engelsk,kinesiska,franska
You must be logged in to post a review.
Recensioner
Det finns inga recensioner ännu.