High temperature 350W Ceramic Finned Air Strip Heater Element
High temperature 350W Ceramic Finned Air Strip Heater Element
Descriere
High temperature 350W Ceramic Finned Air Strip Heater Element
Descriere produs
Finned strip heaters are extremely efficient and dependable as a heat source for hundreds of industrial and commercial applications. They are used for both forced (mounted in a duct) and natural convection air heating (mounted at the bottom of cabinet type ovens). The finned strip heater’s basic design consists of a helically wound resistance coil placed in a specially designed ceramic insulator. The resistance coil ismechanically connected to the screw terminal for positive connection. Stainless steel rectangular tubing is used to house the heater assembly. All remaining voids are filled with high purity magnesium oxide to increase thermal conductivity and dielectric strength. Nickel-plated steel fins (stainless steel optional) are mounted to the rectangular tubing. The fins have been specially designed to provide maximum surface contact for good heat dissipation into the finned cross sections, thus resulting in rapid heat transfer to the air. Finned strip heaters are manufactured in a full line of standard sizes, electrical ratings and terminations, or can be made to your specifications.
Structura
1. Seamless stainless steel sheath.
2. Post terminals.
3. Ceramic element support.
4. Element wire situated in close proximity to outside surface for maximum heat transfer and minimum internal temperature whilepreserving good dielectric qualities.
5. Magnesium oxide packing.
6. Aluminum fins offering maximum radiating surface and providing for rapid heat transfer to the surrounding medium. Stainlesssteel fins are available for corrosive environments.
7.Aluminum fins are standard.
Feature
1. Watt density: Max 35 w/in²
2. Standard Strip width: 40mm
3. Standard Finn dimension: 65X35mm
4. Maximum Allowable Sheath Temperature:
5. Rust resistant Mild Steel 500℃ Stainless Steel 800℃
Specificație
Numele produsului | Finned air strip heater |
Sheath material | SUS304 Stainless Steel |
Insulation material | Ceramic/Mica |
Tensiuni disponibile | 110v, 220v, 230v, 240v, 380V, 480V, according to your requirement |
Putere | Available in a wide range of wattages |
Standard strip width | 38mm |
Standard strip thickness | 11mm |
Standard fin dimension | 51mmx35mm |
Mounting tabs | Available mounting tabs with holes, slots or without tabs |
Terminations Type | Off set terminations, Parallel terminals, terminal at each end or lead wires available |
To Order | ||||
Volt. | wați | Dimensions: mm(inch) | ||
A | B | C | ||
120V | 150 | 140(5.5) | 114(4.5) | 25.4(1) |
240V | 150 | 140(5.5) | 114(4.5) | 25.4(1) |
120V | 250 | 203(8) | 178(7) | 70(2.75) |
240V | 250 | 203(8) | 178(7) | 70(2.75) |
120V | 330 | 203(8) | 178(7) | 70(2.75) |
240V | 330 | 203(8) | 178(7) | 70(2.75) |
120V | 300 | 267(10.5) | 241(9.5) | 133(5.25) |
240V | 300 | 267(10.5) | 241(9.5) | 133(5.25) |
120V | 500 | 305(12) | 279(11) | 184(7.25) |
240V | 500 | 305(12) | 279(11) | 184(7.25) |
120V | 750 | 305(12) | 279(11) | 184(7.25) |
240V | 750 | 305(12) | 279(11) | 184(7.25) |
120V | 500 | 387(15.25) | 362(14.25) | 254(10) |
240V | 500 | 387(15.25) | 362(14.25) | 254(10) |
120V | 750 | 457(18) | 432(17) | 324(12.75) |
240V | 750 | 457(18) | 432(17) | 324(12.75) |
120V | 1250 | 457(18) | 432(17) | 324(12.75) |
240V | 1250 | 457(18) | 432(17) | 324(12.75) |
240V | 1000 | 603(23.75) | 578(22.75) | 470(18.5) |
240V | 2000 | 762(30) | 737(29) | 629(24.75) |
240V | 2500 | 908(35.75) | 883(34.75) | 775(30.5) |
Când comandați, please note the specifications as following:
1. Drawings,if have
2. Putere,Voltaj,Formă
3. Working temperature
4. Material requirement
5. Screw size,if have
6. Quantity
Our factory also support customize. Write to the follow Email to get more details about thefinned heating elements: [email protected]
Evaluarea Clientului
Detalii Imagini
Aplicație
1. Dies and mold heating
2. Autoclaves
3. Thermoforming
4. Resistive Load Banks
5. Food warming
6. Freeze and moisture protection
7. Tank and platen heating
8. Ambalare
9. Ovens
Prezentarea companiei
FAQ
1. Cine suntem noi?
1.We have been doing foreign trade since 2010;
2.Sell to Domestic Market(50.00%), America de Nord(30.00%), Asia de Sud-Est(10.00%), Europa de Vest(10.00%);
3. We have 500m² of office and 2500m² of workshop.
2. Cum putem garanta calitatea?
1.Producem în strictă conformitate cu standardul de management al calității;
2.Inspectăm atelierul o dată la fiecare 2 ore;
3.Confirmați detaliile eșantionului cu clientul pentru fiecare comandă.
3. Ce puteți cumpăra de la noi?
1.Aparat electric (Încălzitor instantaneu, Încălzitor cu aripioare, Element de incalzire a cuptorului, Încălzitor cu circulație);
2.Produse asemanatoare;
3.Daca mai sunt si alte nevoi, we also can help customers to purchase.
4. De ce ar trebui să cumpărați de la noi nu de la alți furnizori?
1.Mai mult decât 40 ani’ heating element industrial experience;2.UL(E501501)/CE/RoHS/CQC ISO9001:2008;
3.R&Echipa D și Laborator;
4.Integrarea industriei și comerțului este foarte benefică pentru achiziția clienților;
5.Produsele aflate în perioada de garanție vor fi înlocuite gratuit.
You must be logged in to post a review.
Recenzii
Nu există încă recenzii.