Heater Part 12K 200C Red Low Wattage Carbon Fiber Heating Electric Silicone Part for Floor Heating Pads

Categoria:

Descrição

Descrição do produto
Nome do Produto
Carbon fiber heating wire
Conductor
Imported carbon fiber wire
Isolamento
Silicone/PTFE
Tensão
DC 3-600V / AC 12-380V
Poder
Voltage*Voltage/(Length*Resistance)
OD
Silicone rubber: 2-4milímetros; PTFE: 1.4-3milímetros
Heating conductor: 1K, 2K, 3K, 6K, 9K, 12K, 18K, 24K,36k,48kInsulating material: Silicone rubber, FluoroplasticWorking voltage: The cable can work on different voltage, but need to use a suitable length, if you don’t know how to calculate the power, please contact us.Key features：* Rapid Heating: Carbon fibers heat up quickly due to their high thermal conductivity.* Even Heat Distribution: The uniform structure of carbon fibers ensures consistent heating across the wire’s length.* Energy Efficiency: Minimal energy loss during heat conversion makes it a cost-effective option.
Usage instructions
1.K represents the meaning of thousands?1K is a thousand silk, 24K is 24 thousand silk (24000) compositionDifferent K numbers represent different resistorsl2.The difference between silica gel and TeflonPTFE/PFA/FEP carbon fiber heating wireAdvantages: Wear, corrosion resistance, no smellDisadvantages: Relative to the silicone are not softSilicone carbon fiber heating wireAdvantages: Resistant to bending, softDisadvantages: There is smell
3.What is the resistance per meter?1K=400Ohm/m, 2K=220Om/m, 3K=133hm/m, 6K=74Ohm/m, 9K=43Ohm/m, 12K=33Ohm/m, 15K=24Om/m, 18K=21Ohm/m, 24K=17Ohm/m, 36K=12Ohm/m,48K=9Ohm/m4. What is the power of the cable? And what is heating temperature?1): 1. The power of the cable is based on the length that you use, you can calculate the power according to above examples.2). Power = 5W/m, the temperature is about 30~40C degrees;Power = 10W/m, the temperature is about 40~50C degrees;Power = 15W/m, the temperature is about 50~60C degrees;Power = 20W/m, the temperature is about 60~70C degrees;Power = 25W/m, the temperatuee is about 70~90C degrees. Please notice that this is for your reference, not exactly right because of different test conditions.5. How to calculated power？Product power calculation:(Voltage*Voltage)÷(resistance*length)=power12K=33ohm/meterFor example, using 10m 12K carbon fiber cable on 220V, the power is:220V*220V÷(10meters*33Ω)=150WFor example, using 15m 12K carbon fiber cable on 220V, the power is:220V*220V÷(15meters*33Ω)=100WThe longer the length, the smaller the power of the heating linePrecautionsThe heating wire can not overlap when used! Can not cross! Cross-over will make the heating line local temperature higher than the melting point of the protective layer, will damage the heating wire!6. About installationThe normal laying power is 100-160 watts per square. Different areas can be increased or decreased according to the room’s own insulation and the type of floor. The installation is very simple, we will guide the installation, the normal laying distance is 12cm.
Aplicativo
Embalagem & Entrega
Avaliação do cliente
Perguntas frequentes
1.P: Podemos usar nosso próprio despachante?
A: Claro. Podemos enviar para eles.

2. P: What are the terms of payment?
A: Telegraphic transfer, 30% deposit before production and the balance before delivery. We can also accept Alibaba Trade guarantee Form.

3. P: Como faço um pedido?
A: Please send your order to us by email and we will confirm with you. Antes da cotação, gostaríamos de confirmar as informações do produto com você, such as voltage, potência, size and quantity. If you have detailed drawings, don’t forget to send them to us. Em todo o caso, entre em contato conosco diretamente por e-mail ou mensagem on-line.

4. P: Como garantimos qualidade?
A: Seguimos rigorosamente os padrões de gestão de qualidade de produção; Confira a oficina a cada 2 horas; E tem sua própria equipe e laboratório de pesquisa e desenvolvimento.

5. P: O que você pode comprar de nós?
A: Electrical appliances (i.e. hot heaters, fin heaters, oven heating elements, circulating heaters) and related products;
Se houver outras necessidades, também podemos ajudar os clientes a comprar.

Avaliações

Não há comentários ainda.

Seja o primeiro a avaliar "Heater Part 12K 200C Red Low Wattage Carbon Fiber Heating Electric Silicone Part for Floor Heating Pads”

seu endereço de e-mail não será publicado. Os campos obrigatórios estão marcados *

Produtos relacionados

  • 220V tubo de calor à prova d'água que rastreia cabo de aquecimento autorregulado para telhado e calçadas

  • 220 V 230 V 240 V Cabo de aquecimento autorregulador à prova d'água Cabo de rastreamento térmico para evitar formação de gelo no encanamento

  • 220v Cinto de aquecimento de borracha de silicone flexível à prova d'água aquecedor de faixa de tambor de óleo redondo

  • 970*120mmm 15l flexible Silicone rubber drum and pail heaterswith digital controller

Whatsapp