220V 5KW Portable Electric Square Flange Immersion Water Heater Element
$11.00
Opis
Flange water heater element are commonly used in many chemical, petroleum and water based applications. YULING flange heaters allow the flexibility of using many different alloys to help resist corrosion and maintain life longevity of the flange heating element.
Steel flanges are typically used for lubricant oils, heavy and light oils, waxes as well as mildly corrosive liquids and low flow gas heating.Flange immersion heaters are constructed of hairpin bent tubular heater elements brazed or welded into ANSI standard flanges or plate flanges of various shapes and sizes. ANSI flange heaters are typically used for large volume, high power and/or higher pressure applications. Plate flange heaters are typically custom designed for use in smaller pieces of equipment such as boiler and chillers.There are two connections, jedno połączenie gwintowe, powszechnie stosowane specyfikacje rozmiar G1 / 2–2 cal, drugie to połączenie kołnierzowe.
Znane również jako połączenie z płaskim kołnierzem . Wspólne specyfikacje rozmiar DN50mm – DN300mm, kołnierz kołnierz rury elektrycznej Powszechnie używanymi materiałami jest mosiądz, Stal nierdzewna, 10 stal, powszechnie stosowany materiał rurowy 10 stal, Stal nierdzewna, miedź. Wspólne specyfikacje, 1.5KW, 3KW, 6KW, 9KW , 12KW, 15KW, 30KW do 500 kW, itp. Stosowany do elektrycznych kotłów wodnych, kotły elektryczne, systemy energii słonecznej, zbiorniki na wodę solarną, baseny chemiczne, łaźnia, baseny i inne miejsca, które wymagają ogrzewania.

SPECIFICATIONS FOR 80mm Square Flange Immersion Water Heating Element |
Materiał tuby: 304 stainless steelVoltage: 220v/380VPower: 5KW/6KW/9KW/12KWFlange: 80MMx80MMTube diameter: 11mmPackage: 1PC x Immersion Heating ElementApplication: podgrzewacz wody

Intensywność ciepła | Not exceeding 30w/cm2 (wskazany) |
Napięcie | 220V |
Moc | 5KW(dostosowane) |
Exhaust extreme (kiedy jest zimno) | Exhaust extreme (kiedy jest zimno) |
Izolacja (kiedy jest zimno) | 5 Min Ohms 500 Minimum watów |
Wytrzymałość dielektryczna | 1500w. 1/sec |
Temperatura pracy | 650 Deg C max |
Gwarancja | 1 rok |
Tolerancja mocy (w) | +5 % – 10 % |
Cold areas | Depends on length and diameter 5-25mm |
Zamówić, Proszę sprecyzuj:
1. Flange size and pressures 2.Heating element watt density 3. Length of your tank 4. Materiał osłony (corrosive or non corrosive) 5. Temperature of the corrodent 6. Degree of aeration of exposed corrodent 7. Velocity of the corrodent






Musisz być zalogowany aby opublikować recenzję.















Opinie
Nie ma jeszcze żadnych recenzji.