High temperature 350W Ceramic Finned Air Strip Heater Element
High temperature 350W Ceramic Finned Air Strip Heater Element
Opis
High temperature 350W Ceramic Finned Air Strip Heater Element
Opis produktu
Finned strip heaters are extremely efficient and dependable as a heat source for hundreds of industrial and commercial applications. They are used for both forced (mounted in a duct) and natural convection air heating (mounted at the bottom of cabinet type ovens). The finned strip heater’s basic design consists of a helically wound resistance coil placed in a specially designed ceramic insulator. The resistance coil ismechanically connected to the screw terminal for positive connection. Stainless steel rectangular tubing is used to house the heater assembly. All remaining voids are filled with high purity magnesium oxide to increase thermal conductivity and dielectric strength. Nickel-plated steel fins (stainless steel optional) are mounted to the rectangular tubing. The fins have been specially designed to provide maximum surface contact for good heat dissipation into the finned cross sections, thus resulting in rapid heat transfer to the air. Finned strip heaters are manufactured in a full line of standard sizes, electrical ratings and terminations, or can be made to your specifications.
Struktura
1. Seamless stainless steel sheath.
2. Post terminals.
3. Ceramic element support.
4. Element wire situated in close proximity to outside surface for maximum heat transfer and minimum internal temperature whilepreserving good dielectric qualities.
5. Magnesium oxide packing.
6. Aluminum fins offering maximum radiating surface and providing for rapid heat transfer to the surrounding medium. Stainlesssteel fins are available for corrosive environments.
7.Aluminum fins are standard.
Feature
1. Watt density: Max 35 w/in²
2. Standard Strip width: 40mm
3. Standard Finn dimension: 65X35mm
4. Maximum Allowable Sheath Temperature:
5. Rust resistant Mild Steel 500℃ Stainless Steel 800℃
Specyfikacja
Nazwa produktu | Finned air strip heater |
Materiał osłony | SUS304 Stainless Steel |
Insulation material | Ceramic/Mica |
Dostępne napięcia | 110w, 220w, 230w, 240w, 380V, 480V, according to your requirement |
Moc | Available in a wide range of wattages |
Standard strip width | 38mm |
Standard strip thickness | 11mm |
Standard fin dimension | 51mmx35mm |
Mounting tabs | Available mounting tabs with holes, slots or without tabs |
Terminations Type | Off set terminations, Parallel terminals, terminal at each end or lead wires available |
Zamówić | ||||
Wolt. | Watts | Dimensions: mm(inch) | ||
A | B | C | ||
120V | 150 | 140(5.5) | 114(4.5) | 25.4(1) |
240V | 150 | 140(5.5) | 114(4.5) | 25.4(1) |
120V | 250 | 203(8) | 178(7) | 70(2.75) |
240V | 250 | 203(8) | 178(7) | 70(2.75) |
120V | 330 | 203(8) | 178(7) | 70(2.75) |
240V | 330 | 203(8) | 178(7) | 70(2.75) |
120V | 300 | 267(10.5) | 241(9.5) | 133(5.25) |
240V | 300 | 267(10.5) | 241(9.5) | 133(5.25) |
120V | 500 | 305(12) | 279(11) | 184(7.25) |
240V | 500 | 305(12) | 279(11) | 184(7.25) |
120V | 750 | 305(12) | 279(11) | 184(7.25) |
240V | 750 | 305(12) | 279(11) | 184(7.25) |
120V | 500 | 387(15.25) | 362(14.25) | 254(10) |
240V | 500 | 387(15.25) | 362(14.25) | 254(10) |
120V | 750 | 457(18) | 432(17) | 324(12.75) |
240V | 750 | 457(18) | 432(17) | 324(12.75) |
120V | 1250 | 457(18) | 432(17) | 324(12.75) |
240V | 1250 | 457(18) | 432(17) | 324(12.75) |
240V | 1000 | 603(23.75) | 578(22.75) | 470(18.5) |
240V | 2000 | 762(30) | 737(29) | 629(24.75) |
240V | 2500 | 908(35.75) | 883(34.75) | 775(30.5) |
Kiedy złożysz zamówienie, please note the specifications as following:
1. Drawings,if have
2. Moc,Napięcie,Kształt
3. Working temperature
4. Material requirement
5. Screw size,if have
6. Quantity
Our factory also support customize. Write to the follow Email to get more details about thefinned heating elements: [email protected]
Ocena klienta
Szczegóły Obrazy
Aplikacja
1. Dies and mold heating
2. Autoclaves
3. Thermoforming
4. Resistive Load Banks
5. Food warming
6. Freeze and moisture protection
7. Tank and platen heating
8. Opakowanie
9. Ovens
Przedstawienie firmy
Często zadawane pytania
1. Kim jesteśmy?
1.We have been doing foreign trade since 2010;
2.Sell to Domestic Market(50.00%), Ameryka północna(30.00%), Azja Południowo-Wschodnia(10.00%), Zachodnia Europa(10.00%);
3. We have 500m² of office and 2500m² of workshop.
2. Jak możemy zagwarantować jakość?
1.Produkujemy w ścisłej zgodności ze standardem zarządzania jakością;
2.Raz na jakiś czas sprawdzamy warsztat 2 godziny;
3.Potwierdź szczegóły próbki z klientem dla każdego zamówienia.
3. Co możesz u nas kupić?
1.Urządzenie elektryczne (Natychmiastowy grzejnik, Grzałka żebrowana, Element grzejny piekarnika, Nagrzewnica obiegowa);
2.Produkty powiązane;
3.If there are other needs, we also can help customers to purchase.
4. Dlaczego warto kupować u nas, a nie u innych dostawców?
1.Więcej niż 40 lata’ heating element industrial experience;2.ul(E501501)/CE/RoHS/CQC ISO9001:2008;
3.R&Zespół D i Laboratorium;
4.Integracja przemysłu i handlu jest bardzo korzystna dla zakupów klientów;
5.Produkty w okresie gwarancyjnym zostaną wymienione bezpłatnie.
Opinie
Nie ma jeszcze żadnych recenzji.