Portable Melting Temperature Measuring Instrument Molten Steel and Iron Water Thermocouple Temperature Measuring Gun W330
$81.99
説明
Installation of the test gun
Open the packaging box, take out the two sections of the test gun, hold the copper head end with your hand, and screw them together section by section in sequence. Be careful not to twist the compensating wire to avoid breaking the weld. After tightening, there should be no shaking sensation.
Carefully insert the signal socket inside the screwed test gun barrel into the signal plug in the instrument gun socket. Make sure to insert it all the way in; otherwise, poor contact may occur. Turn on the power switch of the instrument, and the instrument will display “-1”. After plugging in the thermocouple, the instrument will display the ambient temperature (for instruments with division B, it will display 0). It indicates that the instrument and the test gun have made good contact. At this point, tighten the stop head screw and keep it ready for use.

Resolution (℃) | 1 |
Response time(S) | 1 |
Environmental conditions | Temperature(℃):0-50 Humidity (%RH):5-80 |
Storage time | Temperature(℃):-20-60 Humidity (%RH):5-90 |
Power supply | Rechargeable battery: DC6V±10% |

熱電対 | Division number | 測定範囲 (℃) | Applicable occasions |
Single platinum-rhodium | KS-602/604 | 0-1750 | Molten steel, iron and copper |
Single platinum-rhodium | KR-602/604 | 0-1750 | Molten steel, iron and copper |
Double platinum-rhodium | KB-602/604 | 500-1800 | Molten steel, iron and copper |
Tungsten rhenium | KW-602/604 | 0-2000 | 鋼鉄, molten iron |
Nickel-chromium – nickel-silicon | K | 0-1000 | Liquid aluminium and zinc |
When used in conjunction with the corresponding thermocouple, the instrument can be used for rapid and precise temperature measurement in the smelting scenarios of molten steel, molten iron, molten copper, molten aluminum, 等.

製品包装ソリューション
2.私たちが提供したのは 燻蒸無垢材パレット 大型輸出向けおよび 耐久性のある合板の箱 軽い負荷用, 燻蒸を免除される.
3.すべてのソリューションは国際貿易基準に準拠しています, への出荷の証明書を含む 私たち, カナダ, そしてEU, シームレスな通関手続きと害虫駆除コンプライアンスの確保.


私たちのコアコンピタンス:
2.デュアルチャネル調達ソリューション:直接OEMサービス, 加熱システムとリニア スロット ディフューザーをカスタマイズして、プロジェクト固有のエアフローと熱要件を満たす.
3.直接OEMサービス: 加熱システムとリニア スロット ディフューザーをカスタマイズして、プロジェクト固有のエアフローと熱要件を満たす.
4.技術パートナーシップモデル:取引上の関与を超えて, 暖房ソリューションの換気システム設計とエネルギー効率監査を提供します,多言語によるアフターセールス技術サポート.
5.イノベーションと持続可能性:投資する 8% Rの年間収益の&D より良い新製品の創造に尽力する.


1. Q:私たちは誰ですか?
あなたはきっとそうでしょう ログインしました レビューを投稿するには.















レビュー
まだレビューはありません.