Cartridge Heater 12v 200w Cartridge Heater Element Water Heating Rod
Cartridge Heater Element is a small, cylindrical device used to heat a wide range of materials in various industrial and commercial applications.
Descrizione
Descrizione del prodotto
cartridge Heater 12v 200w Cartridge Heater Element Water Heating Rod
A cartridge heater element is a tube-shaped, industrial heating element that can be inserted into drilled holes. Cartridge heaters provide localized and precise heating and are commonly used in the heating process industry.
Typically, cartridge heaters are used to heat a metal block from the inside and can be custom manufactured to a specific watt density based on the requirements of the application.Cartridge heaters are most frequently used for heating metal parts by insertion into drilled holes. For easy installation, the heaters are made slightly undersize relative to their nominal diameter.
Cartridge Heater Product Features
1. Simple structure, high heating power2. Easy and economical installation
3. Designed and manufactured with good materials 4. Uniform temperature 5. Accurate dimensions, maximum heat transfer 6. Easy maintenance and replacement 7. CE & RoHS approved
Electric Cartridge Heater Element Customization Options
1. Built-in thermocouple 2. Voltaggio (phase ) & energia & watt density3. Non-heating part length4. Diametro del tubo & length5. Sheath material6. Lead/ lead protection7. Seal material 8. Installation – flange/ locating ring/ screw9. Finned 10. Inner structure – e.g. custom distributed wattage
Specifica
Outer Sheath Material | Acciaio inossidabile 304, 321, 316; Incoloy 800; Incoloy 840 |
Resistance Heating Wire | Nicromo 8020 filo di resistenza |
Tolleranza di potenza | +5%, -10% |
Resistance Tolerance | +10%, -5% |
Voltage Available | 12 A 600 volts customied |
Maxium Heating Temperature | 800 Degree Celsius |
Length Tolerance | ±1mm |
Diameter Tolerance | ±0.02mm |
Standard Cold Size | 5-10mm |
Resistenza di isolamento (Freddo) | ≥ 500 MΩ |
Maxium Leakage Current (Freddo) | ≤0.5 mA |
Lead Orientation | UN) Crimped on Leads : PTFE/Fiberglass Flexible lead crimped on solid pin emerging from the Heater.B) Swaged in Leads : Flexible Fiber Glass or PTFE leads emerging from within the heater |
Applicazione
Cartridge heaters are most frequently used for heating dies, platens, molds, and other metal parts by insertion into drilled holes. They can also be used in liquid immersion applications. Below are some examples of specific applications: * Heating gases and liquids * Hot runner molds * Hot stamping * Laminating presses * Medical equipment * Semi-conductor * Plastic molding * Scientific equipment
Dettagli Immagini
prodotti correlati
Valutazione del cliente
Introduzione dell'azienda
Pamela –
Unbeatable in efficiency! Exceptional build. Happy consumer!