Heater Part 12K 200C Red Low Wattage Carbon Fiber Heating Electric Silicone Part for Floor Heating Pads

Heater Part 12K 200C Red Low Wattage Carbon Fiber Heating Electric Silicone Part for Floor Heating Pads


Kategória:

Leírás

Heater Part 12K 200C Red Low Wattage Carbon Fiber Heating Electric Silicone Part for Floor Heating Pads
termékleírás
Heating Electric Silicone Part
termék név
Carbon fiber heating wire
Karmester
Imported carbon fiber wire
Szigetelés
Silicone/PTFE
Feszültség
DC 3-600V / AC 12-380V
Erő
Voltage*Voltage/(Length*Resistance)
-Y -az
Szilikon gumi: 2-4mm; PTFE: 1.4-3mm
Heating conductor: 1K, 2K, 3K, 6K, 9K, 12K, 18K, 24K,36k,48kInsulating material: Szilikon gumi, FluoroplasticWorking voltage: The cable can work on different voltage, but need to use a suitable length, if you don’t know how to calculate the power, please contact us.Key features:* Rapid Heating: Carbon fibers heat up quickly due to their high thermal conductivity.* Even Heat Distribution: The uniform structure of carbon fibers ensures consistent heating across the wire’s length.* Energy Efficiency: Minimal energy loss during heat conversion makes it a cost-effective option.
Heating Electric Silicone Part
Heating Electric Silicone Part
Heating Electric Silicone Part
Usage instructions
1.K represents the meaning of thousands?1K is a thousand silk, 24K is 24 thousand silk (24000) compositionDifferent K numbers represent different resistorsl2.The difference between silica gel and TeflonPTFE/PFA/FEP carbon fiber heating wireAdvantages: Wear, corrosion resistance, no smellDisadvantages: Relative to the silicone are not softSilicone carbon fiber heating wireAdvantages: Resistant to bending, softDisadvantages: There is smell
Heating Electric Silicone Part
3.What is the resistance per meter?1K=400Ohm/m, 2K=220Om/m, 3K=133hm/m, 6K=74Ohm/m, 9K=43Ohm/m, 12K=33Ohm/m, 15K=24Om/m, 18K=21Ohm/m, 24K=17Ohm/m, 36K=12Ohm/m,48K=9Ohm/m4. What is the power of the cable? And what is heating temperature?1): 1. The power of the cable is based on the length that you use, you can calculate the power according to above examples.2). Power = 5W/m, the temperature is about 30~40C degrees;Power = 10W/m, the temperature is about 40~50C degrees;Power = 15W/m, the temperature is about 50~60C degrees;Power = 20W/m, the temperature is about 60~70C degrees;Power = 25W/m, the temperatuee is about 70~90C degrees. Please notice that this is for your reference, not exactly right because of different test conditions.5. How to calculated power?Product power calculation:(Voltage*Voltage)÷(resistance*length)=power12K=33ohm/meterFor example, using 10m 12K carbon fiber cable on 220V, the power is:220V*220V÷(10meters*33Ω)=150WFor example, using 15m 12K carbon fiber cable on 220V, the power is:220V*220V÷(15meters*33Ω)=100WThe longer the length, the smaller the power of the heating linePrecautionsThe heating wire can not overlap when used! Can not cross! Cross-over will make the heating line local temperature higher than the melting point of the protective layer, will damage the heating wire!6. About installationThe normal laying power is 100-160 watts per square. Different areas can be increased or decreased according to the room’s own insulation and the type of floor. The installation is very simple, we will guide the installation, the normal laying distance is 12cm.
Alkalmazás
Heating Electric Silicone Part
Csomagolás & Szállítás
Heating Electric Silicone Part
Ügyfélértékelés
Heating Electric Silicone Part
Heating Electric Silicone Part
GYIK
1.K: Használhatunk saját szállítmányozónkat?
A: Természetesen. Szállíthatjuk nekik.2. K: Mik a fizetési feltételek?
A: Távirati transzfer, 30% letét a gyártás előtt, az egyenleg pedig a szállítás előtt. Elfogadhatjuk az Alibaba Trade garancialapot is.

3. K: Hogyan adhatok le rendelést?
A: Kérjük, küldje el nekünk e-mailben megrendelését és mi visszaigazoljuk Önnel. Idézet előtt, szeretnénk megerősíteni Önnel a termékinformációkat, mint például a feszültség, watt, mérete és mennyisége. Ha részletes rajzai vannak, ne felejtsd el elküldeni nekünk. Mindenesetre, kérjük, vegye fel velünk a kapcsolatot közvetlenül e-mailben vagy online üzenetben.

4. K: Hogyan garantáljuk a minőséget?
A: Szigorúan követjük a gyártás minőségirányítási szabványait; Minden alkalommal ellenőrizze a műhelyt 2 órák; Saját kutató-fejlesztő csapattal és laboratóriummal rendelkezik.

5. K: Mit vásárolhat tőlünk?
A: Elektromos készülékek (azaz. meleg melegítők, bordás melegítők, sütő fűtőelemei, keringető fűtőtestek) és kapcsolódó termékek;
Ha más igények is vannak, a vásárlásban is segítünk ügyfeleinknek.

Vélemények

Még nincsenek értékelések.

Legyen Ön az első, aki értékeli "Heater Part 12K 200C Red Low Wattage Carbon Fiber Heating Electric Silicone Part for Floor Heating Pads