Portable Melting Temperature Measuring Instrument Molten Steel and Iron Water Thermocouple Temperature Measuring Gun W330
Portable Melting Temperature Measuring Instrument Molten Steel and Iron Water Thermocouple Temperature Measuring Gun W330
Opis
Installation of the test gun
Open the packaging box, take out the two sections of the test gun, hold the copper head end with your hand, and screw them together section by section in sequence. Be careful not to twist the compensating wire to avoid breaking the weld. After tightening, there should be no shaking sensation.
Carefully insert the signal socket inside the screwed test gun barrel into the signal plug in the instrument gun socket. Make sure to insert it all the way in; otherwise, poor contact may occur. Turn on the power switch of the instrument, and the instrument will display “-1”. After plugging in the thermocouple, the instrument will display the ambient temperature (for instruments with division B, it will display 0). It indicates that the instrument and the test gun have made good contact. At this point, tighten the stop head screw and keep it ready for use.
Resolution (℃) | 1 |
Response time（S) | 1 |
Environmental conditions | Temperature（℃）：0-50 Humidity (%RH)：5-80 |
Storage time | Temperature（℃）：-20-60 Humidity (%RH)：5-90 |
Power supply | Rechargeable battery: DC6V±10% |
Termopar | Division number | Raspon mjerenja (℃） | Applicable occasions |
Single platinum-rhodium | KS-602/604 | 0-1750 | Molten steel, iron and copper |
Single platinum-rhodium | KR-602/604 | 0-1750 | Molten steel, iron and copper |
Double platinum-rhodium | KB-602/604 | 500-1800 | Molten steel, iron and copper |
Tungsten rhenium | KW-602/604 | 0-2000 | Steel, molten iron |
Nickel-chromium – nickel-silicon | K | 0-1000 | Liquid aluminium and zinc |
When used in conjunction with the corresponding thermocouple, the instrument can be used for rapid and precise temperature measurement in the smelting scenarios of molten steel, molten iron, molten copper, molten aluminum, itd.
Rješenja za pakiranje proizvoda
2.Mi smo osigurali fumigirane palete od punog drva za teški izvoz i izdržljivi sanduci od šperploče za lakša opterećenja, izuzeti od fumigacije.
3.Sva rješenja su u skladu s međunarodnim trgovinskim standardima, uključujući potvrdu za pošiljke u NAS, Kanada, i EU, osiguravanje besprijekornog carinjenja i usklađenosti s deratizacijom.
Naše temeljne kompetencije:
2.Dvokanalna rješenja za nabavu:Izravne OEM usluge, Prilagodite sustave grijanja i difuzore s linearnim prorezima kako biste zadovoljili zahtjeve protoka zraka i topline specifične za projekt.
3.Izravne OEM usluge: Prilagodite sustave grijanja i difuzore s linearnim prorezima kako biste zadovoljili zahtjeve protoka zraka i topline specifične za projekt.
4.Model tehničkog partnerstva:Izvan transakcijskih angažmana, pružamo dizajn ventilacijskih sustava i revizije energetske učinkovitosti za rješenja grijanja,višejezična tehnička podrška nakon prodaje.
5.Inovacija i održivost:Ulaganje 8% godišnjeg prihoda u R&D biti predan stvaranju boljih novih proizvoda.
1. Q:Tko smo mi?
Moraš biti prijavljeni objaviti recenziju.
Recenzije
Još nema recenzija.