Portable Melting Temperature Measuring Instrument Molten Steel and Iron Water Thermocouple Temperature Measuring Gun W330
$81.99
Kirjeldus
Installation of the test gun
Open the packaging box, take out the two sections of the test gun, hold the copper head end with your hand, and screw them together section by section in sequence. Be careful not to twist the compensating wire to avoid breaking the weld. After tightening, there should be no shaking sensation.
Carefully insert the signal socket inside the screwed test gun barrel into the signal plug in the instrument gun socket. Make sure to insert it all the way in; muidu, poor contact may occur. Turn on the power switch of the instrument, and the instrument will display “-1”. After plugging in the thermocouple, the instrument will display the ambient temperature (for instruments with division B, it will display 0). It indicates that the instrument and the test gun have made good contact. At this point, tighten the stop head screw and keep it ready for use.

Resolution (℃) | 1 |
Response time(S) | 1 |
Environmental conditions | Temperature(℃):0-50 Humidity (%RH):5-80 |
Storage time | Temperature(℃):-20-60 Humidity (%RH):5-90 |
Power supply | Rechargeable battery: DC6V±10% |

Termopaar | Jaotuse number | Mõõtmisulatus (℃) | Applicable occasions |
Single platinum-rhodium | KS-602/604 | 0-1750 | Molten steel, iron and copper |
Single platinum-rhodium | KR-602/604 | 0-1750 | Molten steel, iron and copper |
Double platinum-rhodium | KB-602/604 | 500-1800 | Molten steel, iron and copper |
Tungsten rhenium | KW-602/604 | 0-2000 | Teras, molten iron |
Nickel-chromium – nickel-silicon | K | 0-1000 | Liquid aluminium and zinc |
When used in conjunction with the corresponding thermocouple, the instrument can be used for rapid and precise temperature measurement in the smelting scenarios of molten steel, molten iron, molten copper, molten aluminum, jne.

Toodete pakendamise lahendused
2.Meie pakkusime fumigeeritud täispuidust kaubaalused raskeveokite ekspordiks ja vastupidavad vineerkastid kergemate koormate jaoks, fumigeerimisest vabastatud.
3.Kõik lahendused vastavad rahvusvahelistele kaubandusstandarditele, sealhulgas saadetiste sertifitseerimine USA, Kanada, ja EL, tõrgeteta tollivormistuse ja kahjuritõrje vastavuse tagamine.


Meie põhipädevused:
2.Kahe kanaliga hankelahendused:Otsesed OEM-teenused, Kohandage küttesüsteeme ja lineaarseid piluhajutisi, et need vastaksid projektipõhistele õhuvoolu- ja soojusnõuetele.
3.Otsesed OEM-teenused: Kohandage küttesüsteeme ja lineaarseid piluhajutisi, et need vastaksid projektipõhistele õhuvoolu- ja soojusnõuetele.
4.Tehnilise partnerluse mudel:Peale tehingute sõlmimise, pakume ventilatsioonisüsteemide projekteerimist ja küttelahenduste energiatõhususe auditeid,mitmekeelne müügijärgne tehniline tugi.
5.Innovatsioon ja jätkusuutlikkus:Investeerimine 8% aasta tulust R&D olema pühendunud paremate uute toodete loomisele.


1. K:Kes me oleme?
Sa pead olema sisse logitud arvustuse postitamiseks.














Arvustused
Veel pole arvustusi.