Heater Part 12K 200C Red Low Wattage Carbon Fiber Heating Electric Silicone Part for Floor Heating Pads

Kategooria:

Kirjeldus

Tootekirjeldus
tootenimi
Carbon fiber heating wire
Conductor
Imported carbon fiber wire
Isolatsioon
Silicone/PTFE
Pinge
DC 3-600V / AC 12-380V
Võimsus
Voltage*Voltage/(Length*Resistance)
FROM
Silicone rubber: 2-4mm; PTFE: 1.4-3mm
Heating conductor: 1K, 2K, 3K, 6K, 9K, 12K, 18K, 24K,36k,48kInsulating material: Silicone rubber, FluoroplasticWorking voltage: The cable can work on different voltage, but need to use a suitable length, if you don’t know how to calculate the power, please contact us.Key features：* Rapid Heating: Carbon fibers heat up quickly due to their high thermal conductivity.* Even Heat Distribution: The uniform structure of carbon fibers ensures consistent heating across the wire’s length.* Energy Efficiency: Minimal energy loss during heat conversion makes it a cost-effective option.
Usage instructions
1.K represents the meaning of thousands?1K is a thousand silk, 24K is 24 thousand silk (24000) compositionDifferent K numbers represent different resistorsl2.The difference between silica gel and TeflonPTFE/PFA/FEP carbon fiber heating wireAdvantages: Wear, corrosion resistance, no smellDisadvantages: Relative to the silicone are not softSilicone carbon fiber heating wireAdvantages: Resistant to bending, softDisadvantages: There is smell
3.What is the resistance per meter?1K=400Ohm/m, 2K=220Om/m, 3K=133hm/m, 6K=74Ohm/m, 9K=43Ohm/m, 12K=33Ohm/m, 15K=24Om/m, 18K=21Ohm/m, 24K=17Ohm/m, 36K=12Ohm/m,48K=9Ohm/m4. What is the power of the cable? And what is heating temperature?1): 1. The power of the cable is based on the length that you use, you can calculate the power according to above examples.2). Power = 5W/m, the temperature is about 30~40C degrees;Power = 10W/m, the temperature is about 40~50C degrees;Power = 15W/m, the temperature is about 50~60C degrees;Power = 20W/m, the temperature is about 60~70C degrees;Power = 25W/m, the temperatuee is about 70~90C degrees. Please notice that this is for your reference, not exactly right because of different test conditions.5. How to calculated power？Product power calculation:(Voltage*Voltage)÷(resistance*length)=power12K=33ohm/meterFor example, using 10m 12K carbon fiber cable on 220V, the power is:220V*220V÷(10meters*33Ω)=150WFor example, using 15m 12K carbon fiber cable on 220V, the power is:220V*220V÷(15meters*33Ω)=100WThe longer the length, the smaller the power of the heating linePrecautionsThe heating wire can not overlap when used! Can not cross! Cross-over will make the heating line local temperature higher than the melting point of the protective layer, will damage the heating wire!6. About installationThe normal laying power is 100-160 watts per square. Different areas can be increased or decreased according to the room’s own insulation and the type of floor. The installation is very simple, we will guide the installation, the normal laying distance is 12cm.
Rakendus
Pakkimine & Kohaletoimetamine
Kliendi hindamine
KKK
1.K: Can we use our own forwarder?
A: Of course. We can ship it to them.

2. K: What are the terms of payment?
A: Telegraphic transfer, 30% deposit before production and the balance before delivery. We can also accept Alibaba Trade guarantee Form.

3. K: How do I place an order?
A: Please send your order to us by email and we will confirm with you. Before quotation, we would like to confirm the product information with you, such as voltage, võimsusega, size and quantity. If you have detailed drawings, don’t forget to send them to us. In any case, please contact us directly via email or online message.

4. K: How do we guarantee quality?
A: We strictly follow the quality management standards of production; Check the workshop every 2 tundi; And has its own research and development team and laboratory.

5. K: Mida saab meilt osta?
A: Electrical appliances (i.e. hot heaters, fin heaters, oven heating elements, circulating heaters) and related products;
If there are other needs, we can also help customers purchase.

Arvustused

Veel pole arvustusi.

Ole esimene, kes üle vaatas “Heater Part 12K 200C Red Low Wattage Carbon Fiber Heating Electric Silicone Part for Floor Heating Pads”

Teie e-posti aadressi ei avaldata. Kohustuslikud väljad on märgitud *

Seotud tooted

  • 135C 40W/M 230v külmumisvastase toruküttesüsteemi isereguleeruv soojusjäljekaabel

  • The New Listing Rubber Pad 3D Printer 20L 50L 120L 200L Drum Heat Flexible Silicone Heater Strip

  • 220V Waterproof Heat Pipe Tracing Self Regulating Heating Cable for Roof and Driveways

  • 40W/M Transparent Silicone Rubber Constant Power Heating Cable for Gutters

WhatsApp