Calentadores eléctricos de agua de acero inoxidable 1.5 Tri-clamp 240V 4.5kW elemento de calentador de agua eléctrico Elemento de calentamiento de inmersión
Calentadores eléctricos de agua de acero inoxidable 1.5 Tri-clamp 240V 4.5kW elemento de calentador de agua eléctrico Elemento de calentamiento de inmersión
Descripción
Calentadores eléctricos de agua de acero inoxidable 1.5 Tri-clamp 240V 4.5kW elemento de calentador de agua eléctrico Elemento de calentamiento de inmersión
Descripción del Producto
Immersion Tubular Heaters
Electrical flange immersion heaters are designed for heating or temperature maintening of liquids, gas or mixture in static or circulation conditions.
The design is based on customer process conditions: fluid to heat (type and properties), in/out temperature, pressure, heat exchange conditions (stagnant or flowing), and environment conditions (ATEX or not, onshore or offshore, etc.).Flange immersion heaters can be straight or L-shaped.
Technical Data
flange immersion heater for solar water tank | |
Flange size | DN 50 to DN 800 |
Screw plug size | 1″- 3″ |
Diametro del tubo | 8-16 milímetros |
Immersion Length | 150milímetros- 1500milímetros |
Elemento calefactor | 3 elements, 4 elements, 6 elements, 10 elements etc under customer request |
Wattage density | 2-8W/cm2 |
Voltaje | UP to 600V |
Material de la funda | Acero inoxidable 304 316L 310S Copper Incoloy 800 840 |
Built in thermostat well | Built-in thermostat wells can be installed upon request. When ordering, please provide length BUILT-IN THERMOSTAT WELL and internal diameter |
How to choose the right Material for immersion heater?
Solicitud | Material de la funda | Typical Watt Density(w/cm²) | Screw Plug/Flange Material |
Water, Freeze protection, Hotwater storage, Boilerandwaterheaters, Coolingtowers, Solution not corrosive to copper, Food equipment | Stainless Steel304 316L or Copper | 8w/cm2 | Stainless Steel or Brass |
Oil, Heavy and non-circulated oils, Solution water, Corrosive solutions, Steam super heating | Stainless Steel 316L 310s or Incoloy | 2.5w/cm2 | Acero inoxidable |
Light oils , Inforced oil circulation loops | Stainless Steel304 316L | 4.5w/cm2 | Acero inoxidable |
Mildly corrosive solutions | Stainless Steel 316L 310s or Incoloy | 8w/cm2 | Acero inoxidable |
Fluid heat transfer media, Tar, High to low viscosity petroleum oils, Asphalt, Wax, Paraffin, Degreasing solvents, Alcohol, Molten salt, Solutions not corrosive to steel | Stainless Steel304 316L | 2.5w/cm2 | Acero inoxidable |
Process water, Soap and detergent solutions, Soluble cutting oils, Demineralized or deionized water | Stainless Steel304 316L | 4.5w/cm2 | Acero inoxidable |
PLEASE CONSULT CORROSION GUIDE RECOMMENDATIONS. |
Aplicación del producto
Perfil de la empresa
Manera de contacto
Reseñas
Aún no hay reseñas.