Stainless Steel Water Electric Heaters 1.5 Tri-clamp 240V 4.5KW Electric Water Heater Element Immersion Heating Element
Stainless Steel Water Electric Heaters 1.5 Tri-clamp 240V 4.5KW Electric Water Heater Element Immersion Heating Element
Beskrivelse
Stainless Steel Water Electric Heaters 1.5 Tri-clamp 240V 4.5KW Electric Water Heater Element Immersion Heating Element
Produkt beskrivelse
Immersion Tubular Heaters
Electrical flange immersion heaters are designed for heating or temperature maintening of liquids, gas or mixture in static or circulation conditions.
The design is based on customer process conditions: fluid to heat (type and properties), in/out temperature, pressure, heat exchange conditions (stagnant or flowing), and environment conditions (ATEX or not, onshore or offshore, etc.).Flange immersion heaters can be straight or L-shaped.
Technical Data
flange immersion heater for solar water tank | |
Flange size | DN 50 to DN 800 |
Screw plug size | 1″- 3″ |
Rør diameter | 8-16 mm |
Immersion Length | 150mm- 1500mm |
Heating Element | 3 elements, 4 elements, 6 elements, 10 elements etc under customer request |
Wattage density | 2-8W/cm2 |
Spænding | UP to 600V |
Skede materiale | Rustfrit stål 304 316L 310S Copper Incoloy 800 840 |
Built in thermostat well | Built-in thermostat wells can be installed upon request. When ordering, please provide length BUILT-IN THERMOSTAT WELL and internal diameter |
How to choose the right Material for immersion heater?
Ansøgning | Skede materiale | Typical Watt Density(w/cm²) | Screw Plug/Flange Material |
Water, Freeze protection, Hotwater storage, Boilerandwaterheaters, Coolingtowers, Solution not corrosive to copper, Food equipment | Stainless Steel304 316L or Copper | 8w/cm2 | Stainless Steel or Brass |
Oil, Heavy and non-circulated oils, Solution water, Corrosive solutions, Steam super heating | Stainless Steel 316L 310s or Incoloy | 2.5w/cm2 | Rustfrit stål |
Light oils , Inforced oil circulation loops | Stainless Steel304 316L | 4.5w/cm2 | Rustfrit stål |
Mildly corrosive solutions | Stainless Steel 316L 310s or Incoloy | 8w/cm2 | Rustfrit stål |
Fluid heat transfer media, Tar, High to low viscosity petroleum oils, Asphalt, Wax, Paraffin, Degreasing solvents, Alcohol, Molten salt, Solutions not corrosive to steel | Stainless Steel304 316L | 2.5w/cm2 | Rustfrit stål |
Process water, Soap and detergent solutions, Soluble cutting oils, Demineralized or deionized water | Stainless Steel304 316L | 4.5w/cm2 | Rustfrit stål |
PLEASE CONSULT CORROSION GUIDE RECOMMENDATIONS. |
Produktanvendelse
Firmaprofil
Kontakt Way
Anmeldelser
Der er ingen anmeldelser endnu.