Portable Melting Temperature Measuring Instrument Molten Steel and Iron Water Thermocouple Temperature Measuring Gun W330
$81.99
Beskrivelse
Installation of the test gun
Open the packaging box, take out the two sections of the test gun, hold the copper head end with your hand, and screw them together section by section in sequence. Be careful not to twist the compensating wire to avoid breaking the weld. After tightening, there should be no shaking sensation.
Carefully insert the signal socket inside the screwed test gun barrel into the signal plug in the instrument gun socket. Make sure to insert it all the way in; otherwise, poor contact may occur. Turn on the power switch of the instrument, and the instrument will display “-1”. After plugging in the thermocouple, the instrument will display the ambient temperature (for instruments with division B, it will display 0). It indicates that the instrument and the test gun have made good contact. At this point, tighten the stop head screw and keep it ready for use.

Resolution (℃) | 1 |
Response time(S) | 1 |
Environmental conditions | Temperature(℃):0-50 Humidity (%RH):5-80 |
Storage time | Temperature(℃):-20-60 Humidity (%RH):5-90 |
Power supply | Rechargeable battery: DC6V±10% |

Termoelement | Division number | Måleområde (℃) | Applicable occasions |
Single platinum-rhodium | KS-602/604 | 0-1750 | Molten steel, iron and copper |
Single platinum-rhodium | KR-602/604 | 0-1750 | Molten steel, iron and copper |
Double platinum-rhodium | KB-602/604 | 500-1800 | Molten steel, iron and copper |
Tungsten rhenium | KW-602/604 | 0-2000 | Steel, molten iron |
Nickel-chromium – nickel-silicon | K | 0-1000 | Liquid aluminium and zinc |
When used in conjunction with the corresponding thermocouple, the instrument can be used for rapid and precise temperature measurement in the smelting scenarios of molten steel, molten iron, molten copper, molten aluminum, etc.

Produktpakkeløsninger
2.Vi leverede fumigerede massivt træpaller til tung eksport og holdbare krydsfinerkasser til lettere belastninger, fritaget for gasning.
3.Alle løsninger overholder internationale handelsstandarder, herunder certificering for forsendelser til OS, Canada, og EU, sikre problemfri toldbehandling og overholdelse af skadedyrsbekæmpelse.


Vores kernekompetencer:
2.Dual-Channel Procurement Solutions:Direkte OEM-tjenester, Tilpas varmesystemer og lineære spaltediffusorer for at imødekomme projektspecifikke luftstrøms- og termiske krav.
3.Direkte OEM-tjenester: Tilpas varmesystemer og lineære spaltediffusorer for at imødekomme projektspecifikke luftstrøms- og termiske krav.
4.Teknisk partnerskabsmodel:Ud over transaktionelle engagementer, vi leverer ventilationssystemdesign og energieffektivitetsaudit til varmeløsninger,flersproget teknisk support efter salg.
5.Innovation og bæredygtighed:Investering 8% af den årlige omsætning i R&D at være forpligtet til at skabe bedre nye produkter.


1. Q:Hvem er vi?
Det skal du være logget ind at skrive en anmeldelse.















Anmeldelser
Der er ingen anmeldelser endnu.