High temperature 350W Ceramic Finned Air Strip Heater Element
High temperature 350W Ceramic Finned Air Strip Heater Element
Beskrivelse
High temperature 350W Ceramic Finned Air Strip Heater Element
Produkt beskrivelse
Finned strip heaters are extremely efficient and dependable as a heat source for hundreds of industrial and commercial applications. They are used for both forced (mounted in a duct) and natural convection air heating (mounted at the bottom of cabinet type ovens). The finned strip heater’s basic design consists of a helically wound resistance coil placed in a specially designed ceramic insulator. The resistance coil ismechanically connected to the screw terminal for positive connection. Stainless steel rectangular tubing is used to house the heater assembly. All remaining voids are filled with high purity magnesium oxide to increase thermal conductivity and dielectric strength. Nickel-plated steel fins (stainless steel optional) are mounted to the rectangular tubing. The fins have been specially designed to provide maximum surface contact for good heat dissipation into the finned cross sections, thus resulting in rapid heat transfer to the air. Finned strip heaters are manufactured in a full line of standard sizes, electrical ratings and terminations, or can be made to your specifications.
Struktur
1. Seamless stainless steel sheath.
2. Post terminals.
3. Ceramic element support.
4. Element wire situated in close proximity to outside surface for maximum heat transfer and minimum internal temperature whilepreserving good dielectric qualities.
5. Magnesium oxide packing.
6. Aluminum fins offering maximum radiating surface and providing for rapid heat transfer to the surrounding medium. Stainlesssteel fins are available for corrosive environments.
7.Aluminum fins are standard.
Feature
1. Watt density: Max 35 w/in²
2. Standard Strip width: 40mm
3. Standard Finn dimension: 65X35mm
4. Maximum Allowable Sheath Temperature:
5. Rust resistant Mild Steel 500℃ Stainless Steel 800℃
Specifikation
Produktnavn | Finned air strip heater |
Sheath material | SUS304 Stainless Steel |
Insulation material | Ceramic/Mica |
Spændinger tilgængelige | 110v, 220v, 230v, 240v, 380V, 480V, according to your requirement |
Watt | Available in a wide range of wattages |
Standard strip width | 38mm |
Standard strip thickness | 11mm |
Standard fin dimension | 51mmx35mm |
Mounting tabs | Available mounting tabs with holes, slots or without tabs |
Terminations Type | Off set terminations, Parallel terminals, terminal at each end or lead wires available |
To Order | ||||
Volt. | Watts | Dimensions: mm(inch) | ||
EN | B | C | ||
120V | 150 | 140(5.5) | 114(4.5) | 25.4(1) |
240V | 150 | 140(5.5) | 114(4.5) | 25.4(1) |
120V | 250 | 203(8) | 178(7) | 70(2.75) |
240V | 250 | 203(8) | 178(7) | 70(2.75) |
120V | 330 | 203(8) | 178(7) | 70(2.75) |
240V | 330 | 203(8) | 178(7) | 70(2.75) |
120V | 300 | 267(10.5) | 241(9.5) | 133(5.25) |
240V | 300 | 267(10.5) | 241(9.5) | 133(5.25) |
120V | 500 | 305(12) | 279(11) | 184(7.25) |
240V | 500 | 305(12) | 279(11) | 184(7.25) |
120V | 750 | 305(12) | 279(11) | 184(7.25) |
240V | 750 | 305(12) | 279(11) | 184(7.25) |
120V | 500 | 387(15.25) | 362(14.25) | 254(10) |
240V | 500 | 387(15.25) | 362(14.25) | 254(10) |
120V | 750 | 457(18) | 432(17) | 324(12.75) |
240V | 750 | 457(18) | 432(17) | 324(12.75) |
120V | 1250 | 457(18) | 432(17) | 324(12.75) |
240V | 1250 | 457(18) | 432(17) | 324(12.75) |
240V | 1000 | 603(23.75) | 578(22.75) | 470(18.5) |
240V | 2000 | 762(30) | 737(29) | 629(24.75) |
240V | 2500 | 908(35.75) | 883(34.75) | 775(30.5) |
Når du bestiller, please note the specifications as following:
1. Drawings,if have
2. Strøm,Spænding,Form
3. Working temperature
4. Material requirement
5. Screw size,if have
6. Quantity
Our factory also support customize. Write to the follow Email to get more details about thefinned heating elements: [email protected]
Kundevurdering
Detaljer Billeder
Ansøgning
1. Dies and mold heating
2. Autoclaves
3. Thermoforming
4. Resistive Load Banks
5. Food warming
6. Freeze and moisture protection
7. Tank and platen heating
8. Packaging
9. Ovens
Firma introduktion
FAQ
1. Hvem er vi?
1.Vi har foretaget udenrigshandel siden 2010;
2.Sælg til hjemmemarkedet(50.00%), Nordamerika(30.00%), Sydøstasien(10.00%), Vesteuropa(10.00%);
3. Vi har 500m² kontor og 2500m² workshop.
2. Hvordan kan vi garantere kvalitet?
1.Vi producerer i nøje overensstemmelse med kvalitetsstyringsstandarden;
2.Vi inspicerer værkstedet en gang pr 2 timer;
3.Bekræft prøvedetaljerne med kunden for hver ordre.
3. Hvad kan du købe fra os?
1.Elektrisk apparat (Øjeblikkelig varmelegeme, Finnvarmer, Ovn varmeelement, Cirkulationsvarmer);
2.Relaterede produkter;
3.Hvis der er andre behov, Vi kan også hjælpe kunder med at købe.
4. Hvorfor skulle du købe fra os ikke fra andre leverandører?
1.Mere end 40 flere år’ Opvarmningselement Industriel oplevelse;2.UL(E501501)/CE/RoHS/CQC ISO9001:2008;
3.R&D team og laboratorium;
4.Integration af industri og handel er meget gavnlig for kundernes indkøb;
5.Produkter inden for garantiperioden vil blive erstattet gratis.
Anmeldelser
Der er ingen anmeldelser endnu.