11407 Motorblok dykvarmer 120V 400W uden ledning 1″ NPT messingadapter Rustfrit stålmotorkernekomponent godkendt
$8.99
Beskrivelse
11407 Motorblok dykvarmer 120V 400W uden ledning 1″ NPT messingadapter Rustfrit stålmotorkernekomponent godkendt
Produkt beskrivelse
11407 Motorblok dykvarmer uden ledning 1/” NPT messingadapter godkendt 120 Volt 400 Watts
11407 cylindervarmer med 1 “NPT standard interface design, velegnet til nordamerikanske og internationale mainstream motorkølesystemer, kan opnå hurtig varmeoverførsel i det ekstremt kolde miljø af -40 ℃. Built-in high-density nickel-chromium alloy electric heating element and double layer of magnesium oxide insulation, with precision welding process, to ensure that the power output is stable at 400W (120V voltage condition), within 5-20 minutes can raise the engine block temperature to 20-30℃, significantly improve the low temperature cold start performance.

Pressure and corrosion resistant structure
Using 316L stainless steel pipe body and green passivation treatment process, through 0.25MPa pressure test, effectively resist coolant corrosion and engine room vibration impact, service life of more than 5000 start-stop cycles.

Energy saving and consumption reduction
The single preheating energy consumption is reduced by 40%, which is suitable for the environmental protection and energy saving transformation of passenger cars, commercial trucks and construction machinery.
Specifikation
Punkt | værdi |
Vægt | 0.2kg |
Spænding | 120V |
Strøm | 400W |
Interface standard | 1″ NPT Thread |
Materiale | messing |
Garanti | 2 flere år |
produktnavn | 11407 Engine Block Immersion Heater Without wire 1″ NPT Thread Brass Adapter/ 120 Volt / 400 Watts |
Ansøgning | Ford, Merkur, Lincoln, International, Larve, Detroit Diesel, Hino, Mack, Nissan |
Oprindelse | Jiangsu,Kina |
Ansøgning

Application scenarios and benefits
1.Extremely cold environment starting guarantee: Solve the problem of lubrication failure caused by the increase of oil viscosity under low temperature conditions, reduce the engine cold start wear rate by 67%.
2.Fuel efficiency optimization: Intake manifold air temperature increases after preheating, promoting fuel atomization efficiency and reducing unburned hydrocarbon emissions by up to 30%.
3.Compatibility: Supports 12V/24V DC power supply, ADAPTS to diesel engines of Cummins, Larve, and Volvo, and reduces the installation and maintenance time to less than 15 minutter.
2.Fuel efficiency optimization: Intake manifold air temperature increases after preheating, promoting fuel atomization efficiency and reducing unburned hydrocarbon emissions by up to 30%.
3.Compatibility: Supports 12V/24V DC power supply, ADAPTS to diesel engines of Cummins, Larve, and Volvo, and reduces the installation and maintenance time to less than 15 minutter.
Relaterede produkter

3500043 motorvarmer

11409 motorvarmer

3500069 motorvarmer
Det skal du være logget ind at skrive en anmeldelse.















Anmeldelser
Der er ingen anmeldelser endnu.