YuLing WB44K10005 Oven Bake Element Replacement

* ✅【SIZE SPECIFICATIONS】— WB44K10005 Oven Bake Element has push-in terminals and measures approximately 17.8 inches by 17.8 inches. From mounting bracket to back 2-3/8″. From end of terminal to the mounting bracket (measuring up at an angle) 2 5/8″ between each terminal. Terminals are male spade type, Calrod is bent up at then end towards 2 mounting holes. The rated voltage is 2585 watts and the voltage is 240 volts. The package includes 1 x WB44K10005 Range Oven Bake Element. * ✅【HIGHLIGHT】— WB44K10005 Oven Bake Element is at the bottom of the oven and supplies the heat for baking. It only fits for electric ovens and electric ranges. The product has push on wire terminals and terminals are male spade type.Cooled element is easy to clean using only a soft sponge or cloth and warm water with mild soap solution, then wipe dry. The part can fix the following symptoms:①Little to no heat when baking②Element will not heat③Oven not heating evenly④Will Not Start. * ✅【WIDE COMPATIBLE】- Part Numbers:WB44K10001, 824269, AP2030964, PS249238, EAP249238, 36261101000, 36261101001, 36261108000, 36261108001, 36261741000, 36261741001, 36261742000, 36261742001, 36261748000, 36261748001, 36262492000, 36262492001, 36262780100, 36262780101, 36262780102, RB525BC1AD, RB525BC1CT, RB525BC1WH, RB525BC2AD, RB525BC2CT, RB525BC2WH, RB525BC3WH, RB525BH2CT, RB525BH2WH, etc. * ✅【DIY INSTALLATION】 — Unplug your oven or turn off the circuit breaker before installing WB44K10005 Oven Bake Element. Prepare a pair of work gloves, needle-nosed pliers and a phillips screwdriver. Remove the oven door, remove the screws from the lower heating element, remove the wires from the heating element, remove the lower element to secure the new one, and then reassemble the oven in reverse.